Manual Data Entry

Enter emission data from invoices, bills, and other sources

💡 Recommended: actual

Electricity purchased from the grid (non-renewable)

Example: 12,500 kWh from electricity bill

💡 Tip: Your electricity bill shows kWh consumption. This is usually the biggest Scope 2 source.

📐 Unit Conversions:

1 MWh = 1,000 kWh

1 unit = 1 kWh

Your electricity bill shows consumption in kWh (or "units")

How it works

  • 1.Enter activity data from your invoice or bill
  • 2.Select appropriate data quality level
  • 3.System calculates emissions using regional factors
  • 4.Full audit trail is automatically created

Data Quality Guide

Actual (95%)
Direct meter readings, verified invoices
Measured (90%)
Sub-meter data, calculated from bills
Estimated (70%)
Based on floor area or equipment specs
Benchmark (50%)
Industry averages, proxy data

💡 Key Sources

🔴 Refrigerants:Often 30-50% of Scope 1
🟡 Electricity:Usually 40-60% of Scope 2
🔵 Purchased Goods:Typically 30-50% of Scope 3
✈️ Business Travel:Often 15-25% of Scope 3